CGDI Prog MB Programm Benz A166 alle Schlüssel verloren

Beitrag ist, wie man Mercedes Benz A166 alle Schlüssel programmiert , die mit CGDI MB programmer verloren sind , einige Bilder anfügen .

Klicken Sie auf “Sperren (EIS)”, dann “EIS Daten lesen”

cgdi-mb-programm-benz-a166-all-key-verloren-01

cgdi-mb-programm-benz-a166-all-key-verloren-02

Kreuzen Sie “Schlüssel ohne Schlüssel kopieren” an

cgdi-mb-programm-benz-a166-all-key-verloren-03

Warten auf das Lesen der Sperrdaten

cgdi-mb-programm-benz-a166-alle-schlüssel-verloren-04

Bitte fügen Sie den Simulationsschlüssel in 30 Sekunden in das Schloss ein.

cgdi-mb-programm-benz-a166-all-key-verloren-05

Beginnen Sie mit dem Sammeln, Auto Key Programmer es wird lange dauern, trennen Sie das Gerät nicht.

cgdi-mb-programm-benz-a166-all-key-verloren-06

cgdi-mb-programm-benz-a166-all-schlüssel-lost-07

Die Sammlung ist abgeschlossen, bitte speichern Sie die Daten und klicken Sie auf Daten hochladen.

cgdi-mb-programm-benz-a166-all-key-verloren-08

cgdi-mb-programm-benz-a166-all-key-verloren-09

cgdi-mb-programm-benz-a166-all-schlüssel-verloren-10

CGDI MB Fragen Sie den Server ab.

cgdi-mb-programm-benz-a166-all-schlüssel-verloren-11

cgdi-mb-programm-benz-a166-all-schlüssel-verloren-12

Klicken Sie auf “Computer Passwort”

cgdi-mb-programm-benz-a166-all-schlüssel-verloren-13

Klicken Sie auf “Sperren (EIS)”, Schlüssel Passwort auslesen.

cgdi-mb-programm-benz-a166-all-schlüssel-verloren-14

cgdi-mb-programm-benz-a166-all-key-verloren-15

Speichern Sie die EIS-Datendatei

cgdi-mb-programm-benz-a166-all-schlüssel-verloren-16

cgdi-mb-programm-benz-a166-all-key-verloren-17

Erzeuge EE.

cgdi-mb-programm-benz-a166-all-key-verloren-18

cgdi-mb-programm-benz-a166-alle-schlüssel-verloren-19

Laden Sie die EIS-Datei erfolgreich.

cgdi-mb-programm-benz-a166-all-key-verloren-20

Fortsetzung der Verwendung von CGDI Prog MB, um Benz A166 alle Schlüssel verloren zu programmieren.

http://www.fobdii.com

 

How To used MB Star fix 2000 Mercedes S430 Fuel Guage innacuracy

2000 S430 Problem description – Fuel Guage inaccuracy:

I had to change my “Rear Sam?” because of some water damage I had gotten under the back seat, on the passenger side. This had made my fuel guage not work, or any power go to the rear. I had changed the SAM, and now everything works, even the fuel guage. But then I kept on driving, the guage needle would move, but it is innacurate.MB Star C4 It would tell me there is like 18G in the car for about 250miles of driving. And when I fill up the car…The needle will stay all the way down, as if it was not working, then after about 50 miles of driving, it will shoot all the way up.

Top 8 Reasons to Get MB SD Connect C4:

1. Support wireless diagosis

2. Supports K line and CAN BUS diagnosis, besides UDS protocol diagnosis. While MB STAR C4 main board does not have UDS chip and so not support UDS protocol diagnosis;
3. The multiplexer now uses Lan cable to connect;
4. The connector adopts Military quick swap technology, you can plug/unplug it for 10,000 times, always working stable;
5. All core accosseries adopts original new packing chip, tested for 24hours to guarantee the quality of the products;
6. Support offline and online programming, if you want to do online programming, please buy online SCN coding service
7. Support Mercedes Benz Cars after year 2000
8. Multi-Language available: English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/ Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese

Someone had said it is my Sending Unit. Another had told me it was a fuel relay?

Has anybody had this problem, or know about it and can tell me what I can do to fix this…

My fuel guage used to work properly until the rear SAM was damaged, and when I replaced the SAM, The rear tail lights started working again…Because there was no power going to the rear at all because of the damaged comp. Now that I replaced it, I have all power back in the rear, and there is power for the fuel guage…But it just doesn’t read right….And when I fill it up, it wont read at all until about 40 to 50 Miles into my drive.

Solution:

It appears that the SAM MAY need to be coded and it is behaving “strangely” because the unit has insufficient or incorrectparameters to send the correct signal to the fuel gauge.

Coded means “programmed” to match your vehicle.

The SAM you have purchased is a generic part and MAY fit to many models and markets of MB and needs to be “set up”.

This requires connecting to a MB STAR diagnostic tool (MB proprietary) or similartype of diagnostics computer to carry out the procedure.

Connecting to such a computer will also enable On Board Diagnostic codes to be read which should assist in pointing towards the problem by identifying that parameters are missing or implausible for the Vehicle Identity Number VIN etc.

Who is good supplier of STAR diagnostic tool?

I have STAR and it’s worth every penny… just takes some time to get to learn how it works. Dont get one with virtual image software, get an actual Dell D630 with original HD and MB SD Connect C4 unit.

Compared with the virtual image software, it runs faster, Internal is so much nicer because now I just have the multiplexer and laptop to carry to the car, nothing to unplug or fall off, if you use it quite a bit then go External hard drive.

I got the whole set of V2017.12 MB SD Connect C4 with EVG7 895USD on www.fobdii.com

http://www.fobdii.com/category-15-MB-Star-Diagnostic-Tools.html

DTS Monaco and Vediamo Now Added to MB SD C4 V2017.12

The new version V2017.12 MB SD C4 Diagnostic tool is equipped with Vediamo and DTS Monaco Engineer Software Support Offline Programming. How does DTS Monaco and Vediamo software perform? What is the difference between them? Look ahead and you will know.

Super engineer software DTS Monaco is coming after the Vediamo Benz engineer software. MB SD Connect C5 could do separate programming, scan entire vehicle software code, read entire vehicle setting code data and so on. It is truly to achieve on-button operation.

DTS monaco V8.03 Super Engineering Software


 

MB Star Diagnostic Tools Vediamo  V05.01.00 Engineering Software


Here will compare two Mercedes-Benz engineer software : Vediamo vs DTS maonaco
Vediamo software can only read module single data, set code, authority is too low
DTS maonaco software is development by Mercedes Benz manufacturers ,all car data one click scan and save. Data can be directly change the underlying data, the module used directly copied data replacement.  Automatic programming, can automatically set code completely out of online operation.

DTS Monaco VS Vediamo
Function DTS Monaco Vediamo
entire vehicle setting code one-click save yes no
entire vehicle control unit software number one-click save yes no
read entire vehicle fault code yes no
data exchange yes no
quick test yes no
single control unit one-click setting code offline yes no
Offline programming yes yes
Increase or decrease SA code yes yes
Personalized settings control unit parameters yes yes

DTS-monaco introduction
1.DTS-monaco is the official software used by Daimler Benz development engineers
2.DTS Monaco is universal engineering test terminal for the diagnosis and control function of the vehicle controller, The name Monaco is derived from the modular analyzer used in vehicle traffic
3.DTS Monaco covers all the tasks in the field of engineering, testing and production test preparation
4.When Mercedes-Benz maintenance test it is the greatest authority,the perfect support for MB SDConnect C4(SDconnect) and (Ecom) Hardware(at present, Das-xentry.Vediamo lower authority)

DTS-monaco special feature
1.Quick Test:Entire vehicle ECU quick test, and the test can choose to edit more
2.Variant Coding: Coding with variation add VO- delete VO function
3.ID identification :One click to read the whole car and save all modules programmed numbers
4.Complete Variant Coding: One time to read all the ECU coding vehicle data, can be written to the vehicle again, completely off-line operation
5.Diagnostic Services: Advanced features can see your choice of internal and external data module, turn on the computer authorization(not driving license), Activate ECU, reset ECU, modifying the original chassis number
6.Flash programming: Fully offline programming
7.Diagnostic Trouble Code: Diagnostic module DTC fault code
8.ECU Exchange: Two of the same ECU, by reading data import data exchange
9.Symbolic trace: Record and track the file, after repeated viewing, analysis of fault logic point

New V2017.12 MB SD Connect C4 now release on fobdii.com:

http://www.fobdii.com/category-15-MB-Star-Diagnostic-Tools.html

 

How To solved SD connect C4 error 8.561.6067 when variant coding on Smart 450

Got the 8.561.6067 error when I wanted to change some things in variant coding for my smart 450. Tried some methods and then solved in the end. Just post for sharing.

V2017.12 MB SD C4 Software Functions:

V2017.12 MB SD Connect Compact 4 MB Star C4 Diagnostic Tool With WiFi for Cars and Trucks

1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

Ps. Tool i used: sdconnect c4 software 07/2017

SOLVED!

Note: Unlock the ECU first!

  1. MB SDConnect C4 Go to the developer menu in SAM (last item)
    SD-C4-Error 8.561.6067 (1)

2. Enter “Actuations
SD-C4-Error 8.561.6067 (2)

3. Choose “Complete index
SD-C4-Error 8.561.6067 (3)

4. Scroll all the way down and choose SG_Entriegelung (=control unit unlock)
SD-C4-Error 8.561.6067 (4)

Perform unlock (F3)

After this the variant coding can be saved without the error, I can save every setting i want.

Maybe it is a similar thing for other MB Star Diagnostic Tools models…

http://www.fobdii.com/category-15-MB-Star-Diagnostic-Tools.html

How to solve BMW Icom A2 A3 host can’t be connected?

Aftre the BMW ICOM host is connected to the car via a 16PIN connector, and the other side is connected to the computer via a network cable. Your BMW ICOM lan and system lights will light up. As follows:

But at this moment,the host can’t be found in the computer.As follows:

When meeting the problem,please update your BMW ICOM firmware as the following method:

1.Please connect BMW ICOM A3 to the computer vith network cable and power on the BMW ICOM with a 12V power adapter.

2.Open the website address http://169.254.92.38:60080/by IE browser, username:root   password:NZY11502.

3.Click the “update firmware”,it will show ICOM firmware version information.

4.Choose the file ICOM-BootImage-01-11-01.bin,set image type to SYSTEM,click “Send the file”.

5.When shows “Write the image file to the flash?”,click “Yes”,then ICOM light turns red.

6.When shows “The SYSTEM IMAGE update was successfull”,click “Update Firmware”.

7.Choose the file ICOM-ApplicationImage-01-15-01.bin,set image type to APPLICATION.Click “Send the file”.It will takes a few minutes because of a little large file.

8.When shows “Write the image file to the flash?”,click “Yes”,then the ICOM light turns red for the second time.

9.It is all normal,click “reboot”.

After finishing these steps,please connect again,the ICOM host will be found in the computer,as follows:

http://www.fobdii.com

Functions and Repair Report For Launch EZcheck Scan Tool

Launch X431 EZcheck turns your iPhone or Android phone into a powerful yet affordable Professional OBD2 Scan Tool that lets you scan and understand your vehicles. Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles.

Launch X431 EZcheck Functions:
1. Easily determines the cause of the “Check Engine Light (MIL)”.
2. Reads hard (memory)/pending (intermittent) and historic codes and show definitions.
3. Turns off Check Engine Light (MIL), clears codes and resets monitors.
4. I/M monitor readiness test.
5. Retrieves vehicle information (VIN).
6..Read data stream

Launch EZcheck Professional Car Repair Report:

For specific DTCs,EZcheck generate a Professional Car Reapir Report:

http://www.fobdii.com/brand-5-Launch-X431.html

How To Program Ford Fiesta 2016 All Smart Keys Lost By Lonsdor K518

One of our customer have successfully programmed smart key on a Ford Fiesta year 2016 by using Lonsdor K518ISE key programmer when all keys lost yesterday.

Guide:

Connect K518ise host with vehicle via OBD diagnostic socket

Turn on Lonsdor K518, press on Start button, dashboard displayed “Key not detected”

select Immobilizer->Ford->Fiesta->Program Smart Key->Program Key->All keys lost

k518-ford-fiesta-2016-1

k518-ford-fiesta-2016-2

k518-ford-fiesta-2016-3

k518-ford-fiesta-2016-4

k518-ford-fiesta-2016-5

Require at least two smart keys to be programmed

k518-ford-fiesta-2016-6

Insert new Auto Key Programmer  key and turn ignition switch on

Press the Start button

k518-ford-fiesta-2016-7

Configuring system

k518-ford-fiesta-2016-8

Reading pin code

k518-ford-fiesta-2016-9

Configuring system

Press Lock button of the first smart key for 1 sec within 15 sec

k518-ford-fiesta-2016-10

k518-ford-fiesta-2016-11

configuring system, please wait about 10 minutes

Insert the smart key into slot

k518-ford-fiesta-2016-12

Configuring

Remove the smart key from card slot

k518-ford-fiesta-2016-13

Press Unlock button of the next smart key for 1 sec within 15 sec

k518-ford-fiesta-2016-14

configuring system, please wait about 10 minutes

k518-ford-fiesta-2016-15

Insert smart key into slot
Remove key from slot

Lonsdor K518ISE will ask continue to program smart key, click on Cancel

k518-ford-fiesta-2016-16

Program smart keys success.

k518-ford-fiesta-2016-17

k518-ford-fiesta-2016-18

The new keys will start car.

Success.

http://www.fobdii.com

Any Difference 2018 Launch X431 V+ between 2014 Version ?

2018 Launch X431 V+ is something different from 2014 Version in the outlook design i.e package box color, front camera, rear camera, DBSCARII outlook, etc.

X431 PRO3 Launch X431 V+ Wifi/Bluetooth Global Version Full System Scanner

Top 9 Reasons to Get Launch X431 V+:

1. Supported Languages: English, Spanish, Arabic, French, Korean, Japanese, German, Russian
2. Wi-Fi: Supported
3. Bluetooth: Supported
4. Dealer Code: 86A or 86K
5. One click update: You do not have to download software to memory card anymore, can do one click update directly through your machine.
6. There is User Manual in the Multiplexer, you can check it when you use the device. It is in “cnlaunch” file
7. Two Years Free Update Online, After Two Years, It Cost 459usd/year,130USD/time,  if you don’t want to update, the old software can still work too
8. Oversea full configuration contains total 59 softwares,See attached configuration Software List
9. No Software download IP limitation: Oversea download and update available

Here we go for details.

2018 Launch X431 V+full package looks like this:

2018-launch-x431-v-plus-scanner-full-package-01

2018 Launch X431 V+package color is white not Black.

2018-launch-x431-v-vs-2014-version

2018 Launch X431 V+Mux has no front camera

2018-launch-x431-v-vs-2014-version-02

2018 Launch X431 V+Mux back comes without rear camera.

2014-launch-x431-v-plus-back

2018 Launch X431 V+DBSCAR5 and 2014 Launch X431 V+ DBSCARII

launch-x431-v-dbscar5

For more 2018 Launch X431 PRO3 update, browse:

http://www.fobdii.com/wholesale-288-launch-x431-v-plus-wifi-bluetooth-scanner.html

How To Solved MB SD Connect C4 cannot access OBD port

MB SD Connect C4 diagnostic system can not only support Mercedes Benz Diagnostic function, it can also read faults from Benz SRS system.

MB SD Connect Compact 4 Supported Vehicle List:

MB SD C4 Support Mercedes Benz Cars After Year 2000

Passenger Car Support List:
A(176),  A(169),  A(168),  B(246),  B(245),  CLC(117),  C(204)  C(203),  C(202),  190(201),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),  S(220),  S(140),  S(126),
E(207),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  CL(215),  CL(140)  SLK(172),  SLK(171),  SLK(170),  SL(231),  SL(230),  SL(129),  SL(107),  SLS(197),
M(166),  M(164),  M(163),  G(463),  G(461),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),S(220),  S(140),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),
CL(215),  CL(140),  SLK(172),  SL(231),  SL(230),  SL(129),  SL(107),SLS(197),  M(166),  M(164),  M(163),  G(460),  GL(164),  GLK(204),  R(251)

Van Support List:
MB 100(631),  T1,  SprinterIII,  SprinterII,  SprinterI,  Sprinter900,  Citan,  Vito(639),  Vito(638), V(638),   Viano(639),  T2,  Vario,  Vaneo(414)

Truck Support List:
Actros963/4,  Actros2,3,  AtegoIII,  AtegoII,  AxorII,  Eonic,  Zetros,  Actros,  Atego Light,  Atego Heavey,  HPN M96,  Atron,  HPN M2000,  SKL,  FSK,  Further model series

Unimog Support List:
U20,  UGN,  UHN

Bus Support List:
TRAVEGO,  INTOURO,  INTEGRO,  CITARO,  CAPACITY,  CITO,  TOURISMO,  O350/O403, CONECTO,  O404,  O405-O408,
Minibus,  OC500,  TOURO,  TOURINO,  MBC,  MULITEGO,  O500,  O500/OH,  OH,  OH368,  OF,  OF384,  LO,  O400,
FURTHER MODEL SERIES

Super Sports Car Support List:
SLR(199)

Problem:

According to customer’s feedback that he failed to access to the diagnostic OBD port when tried to read errors code from Benz SRS system. The system prompted an error message “check cable connection/turn ignition on”.

Possible reason:

The error lies on the SD Connect C4’s battery.

Solution from mbstarshop:

1) Check and record your MB SDConnect C4 multiplexer battery
2) Hook up a digital multimeter to set it to the direct current
3) Get two t-pins and plug them into the OBD socket at PIN 5 and PIN17 position
4) Put your positive lead to PIN16 and negative lead to PIN5.
5) Write down the voltage on the digital multimeter
6) Check if the voltage you from PIN16 and PIN 5 is same in step 1.
7) Find the light green wire with a blue tracer band of PIN10 of the OBDII connector.
8) If the voltage differs in step 1 and step 6, the problem is probably with your battery.
9) If the battery is damaged or broken, please replace your battery.

http://www.fobdii.com/wholesale-79-mb-sd-connect-compact-4-star-diagnosis-tool-with-wifi.html

How to install MB SD Connect C4 WIFI Card And Batteries

The newest MB SD Connect Compact 4 wireless Star diagnosis with V2017.12 software HDD has been come out. Do you know how to use it? To install batteries is the first step you have to do. Here is the detailed instruction help to install MB SD C4 batteries.

 MB SD C4 Connect Compact 4 2017.12 Star Diagnosis with WIFI for Cars and Trucks feature:

1. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose;

2. New MB SDConnect C4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. Because old MB STAR C4 main board do not have UDS chip, so old MB STAR C4 can not support it;

3. Multiplexer now use Lan cable to connect, can fit Only applies to DELL computer and ThinkPad  computer

4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;

5. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products;

6. Support multi-language, such as English, German,French,Italian, Spain, Portugal, Finland, Denmark, Sweden and so on.

  1. Please prepare the following tools:

tools for installing battery

①— MB Star Diagnostic Tools multiplexer which need to input the batteries。
②— 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。
③— 1 unit 108M WIFI Card。
④— Plum screwdriver,Specification:T-20

  • 2.Take out the rubber:


2.1 Use the T20 Plum screwdriver to take out the screws as below.
take ou the rubber
2.2 Take out the rubber as below.
①— Batteries Space.
②— WIFI Card Space.
③— SD Card Space.

  1. Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.


3.3 Insert the batteries. Note the Battery polarity.


3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.


3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

  1. Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.

4.2 Push it to make it totally connected.

4.3 Cover the rubber and fix the screws to finish all the work.


That’s all about how to install MB SD Connect C4 diagnosis

http://www.fobdii.com/wholesale-79-mb-sd-connect-compact-4-star-diagnosis-tool-with-wifi.html