Voltage regulator for GM Tech2

Hello everyone, sometimes asking where I am and where to find the correct voltage for the GM Tech2 diagnostic tool . Guangzhou Jinsheng Yang Technology Co., Ltd. VRB1205LD-15W. For myself, I’m looking for them on ebay or aliexpress. So here is the corresponding list, I have not tested:
Yuan Dean Scientific 67D-12S05RNL
Aimtec AM15E-1205SZ
Aimtec AM15E-1205SIZ
Intronics W15C-12S5
Motien V7E-1205S15
Motien V7-1205S15
Minmax MKW2522
Minmax MKW2529
Murata (C & D) UWR-5/3000-D12A-C
Traco TEN 15-1211
Traco TEL 15-1211
Recom RP15-1205SF


5-2

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2011.

Here is the native voltage regulator, which was after buying vetronix tech 2 Scanner

I was often asked how to work with Tech 2 before you replaced the regulator. important! Regulator must be replaced! And those who did not finish, and want to have his device did not restart each time a skill. Below is a pinout diagram for the connector Obd ii scanning tool, which we need to disable temporarily for 16 pins. AC Power Technology 2 Power is supplied from the power supply on the device or from a second battery using a tick in the kit.

How To using GM Tech 2 reprogram any module

Hello there!
Today I will simply tell you some of the possible problems and programming.
So, if your vetronix tech 2 is working, but something goes wrong and something goes wrong, the first thing we need to do is retest the device.
If you have DLC 1, TPU, CCD, DLC2 – FAIL. Then break the device and carefully solder all the chips we see on the motherboard. If the error in the block VCI then parses it, and also parses all the languages. Only after all of these actions, if you can not fix the error, consider buying a new motherboard from www.fobdii.com

Now let’s talk about programming.
Disagreement here. Some people say that you can assemble with a cheap Chinese card. Some people say that you only need to use the original one, of which there is an adapter for write protection. If a cheap card flies behind the firmware, try rewriting the software again, but wipe it all before writing.
Another method of firmware is “cross cutting.” In short, this means that the Tech 2 Scan Tool can be connected to both the machine and the PC. The management process itself passes GlobalTIS.
You may need a PC driver to see Tech 2 as driver J2534.
Good luck, good luck.

PS: There are no DB9 connectors on some laptops. Here you can buy an adapter db9 to USB.

NEW UPDATE OBDSTAR For FEBRUARY 2018

OBDStar Brand Tool New Update on February.24, 2018.  Here is full detail Obdstar update information:

Cluster Calibrate

BMW:

Increased in FEM/BDC module the cluster calibrate, reading fault code, clear fault code, energize without key functions.

IMMO

1. Increased following functions in Peugeot/Citroen/DS BSI system:

<1>CONTINENTAL BSI-Q0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<2>JC BSI04EV-K0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<3>JC BSI2004-H0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<4>JC BSI04EV2-KEX: EEPROM Backup, EEPROM Recover, FLASH Backup.

<5>SIEMENS BSI-S0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<6>SIEMENS BSI-E0X/BSI-F0X: EEPROM Backup, EEPROM Recover.

<7>VALEO BSI-N0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<8>VALEO BSIEV-X0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<9>VALEO BSI2004-P0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

2. Roewe

Increased MGZS Key programming.

Increased Roewe 550 pincode reading.

Increased MG6 pincode reading.

3. Porsche increased key programming for following models:   

Boxter(2005-2011)

Cayman(2005-2011)

997(2005-2010)

911(2005-2010)

4. Great Wall

Increased WEY VV5C/VV5S、VV7C/VV7S smart key system.

5. Renault

Increased IMMO system 7, type 8.

6. BMW   

Increased in FEM/BDC module the ECU change function, engine ISN code reading, energize without key, all keys lost programming.

Special Function

Tire Pressure:

1. Increased Benz-Mercedes tire pressure monitoring.

2. Increased Renault tire pressure monitoring system.

3. Increased Volvo tire pressure monitoring system.

Hot Selling Obdstar tool recommend: 

OBDSTAR X300M is for odometer adjustment

OBDSTAR X300 M is for odometer adjustment, which creates profession.The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming. Upgrade via TF card at any moment.

OBDSTAR X300 DP Android Tablet

OBDSTAR X300 DP Full Package, with Android System Based and multi-language available, includes these functions: Immobilizer+ odometer adjustment+ EEPROM/PIC adapter+ OBDII+ ABS+ TPS+ SRS reset+ TPMS(low tire)reset+ Steering angle reset+ CVT learning/Value reset+ EPB+ Oil/service reset+ Battery matching+ Diagnosis(Japanese and Korean serials).

http://www.fobdii.com

 

Update Gudie For Autel MaxiSys Pro MS908P Software

This article aims to guide on how to update software for Autel MaxiSys Pro .

The Autel MaxiSYS MS908P 908 Pro includes the MaxiFlash Elite reprogramming box and special MaxiSYS® Pro software are needed for shops and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks.

(Suitable for MaxiDiag Elite,MaxiCheck,TS501,TS601,AL609,AL619,EBS301,OLS301,VAG505, MOTPRO)

Step 1:Register the tool
Please go to our website www.autel.com to register an Autel ID.
Then sign in our website with your Autel ID and password to register your tool: http://pro.auteltech.com/

Note: when registering the tool on our website, please make sure that the serial number and register
password that you input are correct. On the tool itself, you can press on Setup->About to double check
the serial number and register password. If you only have the S/N, please contact our technical support
to check out the register password.

Step 2:Update via Computer: 
1. Log in our website with your Autel ID and password, and then download the latest PC Suite for your tool from your account.

2. Then please install the PC Suite on a Windows computer that can get Internet access.
3. Insert the SD card to USB port of the computer via a SD card reader, run the PC Suit, then input your Autel ID and password
to log in our system. If you forget your password unintentionally, you may always click the [Forget Password?] to link to our
website and reset your password.

4. Then wait for the Update window to display. You can use the pull-down menu on the right corner to select the correct SD card
if two or more SD cards have been connected to the PC. Auto Key Programmer And you can click on the Install button to download the software updates.
5.To ensure the good performance of the scan tool, it is recommended to download and install all the software updates.

6. After downloading all the software, please insert the SD card back to the tool; then you can enjoy the new software.

http://www.fobdii.com/wholesale-289-maxisys-ms908p-pro.html

How To used VVDI Prog Program Benz Sprinter 2002-2005 Key

Here’s the guide to add immo key to Mercedes Benz Sprinter year 2002 to 2005 using Xhorse VVDI Prog and Tango transponder key programmer.

Step 1: Read data with VVDI Prog

Remove Sprinter Immo box

Find 4L52H mcu chip

Make connection

Open VVDI Prog software

Select Type, Brand and chip: Sprinter Immo Box (2002-2005)

Click on Connection diagram and view diagram

Sprinter 4L52H mcu pinout to VVDI Prog Auto Key Programmer

Click on Chip Config

Select Security Bytes->Search from file->MC68HC(9)08_SECURITY_BYTES.cfg

Read data

Save eeprom data

Step 2: Write transponder with Tango

Open Tango key programmer software

Select Car Model tab->Benz->Cars->Sprinter

Load eeprom file just read by VVDI prog

Click on Write key button

Then

Confirm key position

Follow tango prompts until success.

http://www.fobdii.com

Guide For Use OBDSTAR H108 PSA Programmer

OBDSTAR H108 is newly designed by OBDSTAR Company for PSA vehicles immobilizer programming and dashboard reset. In the software, obdstar H108 can perform BSI model automatic identification and pin code reading when all keys lost, can read write EEPROM, FLASH etc. In the hardware, the device adopts the upgraded main board which allows user to test more freely, operate more easily and offer better user experience. obdstar H108 can be widely used on after-sale market, repair shops, car technicians and car owners.

Top 4 reasons to buy OBDSTAR H108 Programmer:

1. Read write EEPROM, read FLASH

2. Read Pin code when all keys lost

3. Support BSI model automatic identification and manual selection

4. Competitive price comparing with the similar devices ie. PSA read PIN BSI(PTP2), PT0004 Read PIN in PSA by OBD.

How to use OBDSTAR H108 

obdstar-H-main-unit

Functions Setting 

Power on, and then press ENTER on the screen, then go to the function setting, setting information as shown below:

 

Select different functions according to different requirements.

obdstar-H-funtion-setting-2

Note: Software numbers and functions are different according to different product configuration. Further detailed information, please contact your distributor.

System Setting Select System Setting, language and font can be adjusted, as shown below:

obdstar-H-funtion-setting-3

Language Selection

This device supports English. In the language directory, select required language and press ENTER to confirm it.

obdstar-H-language-setting-1

According to requirement, select different font

obdstar-H-FONT-settting

Metric/Inch

According to different requirements, select the Metric/Inch by the up and down keys, and press ENTER to confirm as show below,

obdstar-H-metric-inch

Data Logging

Any problems during testing, please use the Data Logging function to record the test process and send the data to us. Auto Key Programmer  Select ON by the up and down keys and press ENTER to confirm, shown as below,

Note: Every time you need to select ON if you want to record the data before testing car.

System Information System information includes product serial number, hardware version, software version, release date, register password, etc.

obdstar-H-date-logging

Device Self-test

Device self-test includes screen display, keyboard testing. hardware selftesting, etc. If it cannot show enough pictures on the screen, keyboard not work, and hardware self-test not get through, please return this product to the manufacturer.

obdstar-H-selt-test

 Update tool software installation

Login our website:http://en.obdstar.com and click “One Key Upgrade”. Download the update tool and diagnostic software, double click, then go to the next step:

Step 1:Click “Next”

obdstar-H-software-update-1

Step 2: Click “Next

obdstar-H-software-update-2

Step 3: Wait for several minutes then the installation

obdstar-H-software-update-3

Step 4: Click “Finish”

obdstar-H-software-update-4

After Update Tool installation completed, click the Update Tool software icon on desktop to start the update tools. The main interface is as shown below:

obdstar-H-software-update-+5

Register

Click ”Sign up” to fill in user information, Username can be English characters or the combination of alphabet and numbers. Serial number and register password can be referred to System information in the device.( Figure 1.4.3) For distributor code, please refer to your distributor for more details.

obdstar-H-software-update-6

Operation steps as following: Step 1: Remove the TF card from your device. Insert your TF card into computer. Step 2:Open update tool and login. Step 3: Click the source menu, choose the software you want to update, click it and confirm. Step 4: Click and select all the software then click “update”. (Note: It is better to click “Format memory car” during updating.) Step 5: Wait for several minutes then the updating finished.

obdstar-H-software-update-7


Note:For new update software and questions during updating, please contact your distributor.

http://www.fobdii.com

GM Tech2 Scanner Technician Experience

Tech2 Scanner with TIS2000 for GM, is a very good tester used to diagnose GM vehicles. The Vetronix Tech 2 contains Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2011. TIS2000 supports till 2007 year GM car programming,supports GM/SAAB/OPEL/SUZUKI/ISUZU/HOLDEN.

1) GM TECH2GM programming and C6 diagnosis
The GM Tech2 is still a stable workhorse of a scan tool for the GM stable. I still have an old Tech1a which I use on the older cars mainly before 2009 year. My Tech2 is the only scan tool that I use when tuning our cars. I prefer it over the scanner software that is included in the tuning software. For me it much easier than wrestling with a laptop when on the dyno and especially when driving on the street. GM MDI is the new standard, but it is only for a few cars (GM and Opel) at this time. One being the new gen Camaro. It is part of the new Global Diagnostics systems that GM is steering towards.

If you had a Tech2, you could possibly talk to the dealer and have them access their TIS system to load the BCM or PCM calibration to your Tech2. Some may do it.
If you can’t do that, just buy additional TIS2000 with USB key.

GM tech2 would NOT work with All C5’s, if you are going to use it on a C6, make SURE you have the CAN D modules.

2) GM Tech2 Scanner is too pricey for personal
Someone consider GM Tech2 is too pricey for personal, some simple cables may help, and then they searched kinds of elm327 USB.
Fobdii engineer options: problem is that solution like the scanners you can buy in the auto parts store is incomplete. All it lets you do is access OBDII codes which are about 55% of the codes that can occur on the car. The others 45% are where you have issues and where a lot of failures occur. If you do nothing to the ECM you can go for years and many thousands of miles without ever needing to read the OBDII codes.

3) GM TECH 2 can do-personal experience
Update I purchased the correct updated memory card off the internet with the GM Calibrations and I purchase a used CANDi module so I can use it on my C6.
My GM TECH 2 is now fully functional for F body, C5 and C6. It cost me a lot more than the initial $1000 that I thought was a good deal. Lesson learned..

If you get a used one, MAKE SURE it is properly updated, has the correct memory card and has all the required adaptors and cables otherwise,, it just a pretty paper weight!

http://www.fobdii.com

(2018-02-24) Upgrade Announcement OBDSTAR Products

OBDSTAR X300 DP/X300 Pro3 release new upgrade on Feb. 24th, 2018.

OBDSTAR X300 DP is the first tablet of OBDSTAR, which has reached a higher level in key programming and diagnosis. Inheriting from OBDSTAR professional auto programming and advanced diagnosing technology, OBDSTAR X300 DP is characterized by covering wide range of vehicles, featuring powerful function, and providing superior quality. Meanwhile, taking advantage of Android system, OBDSTAR X300 DP integrates more application and service, such as Maintenance Database, remote assistant, and One Key Update etc.

X300 PRO3 key master by OBDSTAR Company features with the immobiliser key programming function of SKP900,as well as new function e.g. Odometer adjustment, EEPROM/PIC and OBDII. Its design is fully based on industrial standard, for example, it is designed with bilateral keyboards which make it easy to operate, besides its appearance is processed by special material and reaches to the shockproof level.

Cluster Calibration 

BMW:

Increased in FEM/BDC module the cluster calibrate, reading fault code, clear fault code, energize without key functions.

IMMO

1. Increased following functions in Peugeot/Citroen/DS BSI system:

<1>CONTINENTAL BSI-Q0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<2>JC BSI04EV-K0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<3>JC BSI2004-H0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<4>JC BSI04EV2-KEX: EEPROM Backup, EEPROM Recover, FLASH Backup.

<5>SIEMENS BSI-S0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<6>SIEMENS BSI-E0X/BSI-F0X: EEPROM Backup, EEPROM Recover.

<7>VALEO BSI-N0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<8>VALEO BSIEV-X0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

<9>VALEO BSI2004-P0X: EEPROM Backup, EEPROM Recover, FLASH Backup.

2. Roewe

Increased MGZS Key programming.

Increased Roewe 550 pincode reading.

Increased MG6 pincode reading.

3. Porsche increased  Auto Key Programmer for following models:   

Boxter(2005-2011)

Cayman(2005-2011)

997(2005-2010)

911(2005-2010)

4. Great Wall

Increased WEY VV5C/VV5S、VV7C/VV7S smart key system.

5. Renault

Increased IMMO system 7, type 8.

6. BMW   

Increased in FEM/BDC module the ECU change function, engine ISN code reading, energize without key, all keys lost programming.

Special Function

Tire Pressure:

1. Increased Benz-Mercedes tire pressure monitoring.

2. Increased Renault tire pressure monitoring system.

3. Increased Volvo tire pressure monitoring system.

http://www.fobdii.com

Server Upgrading Announcement For OBDSTAR Company

Many customer feedback that they can not update their OBDSTAR products.The OBDSTAR company explain that they are updating their official server at the moment,it will result in products updating trouble.OBDSTAR engineer advice customer to update their products after server updating completing.

“To offer all valued customers better experience and service,OBDSTAR official website is extending and upgrading server at the moment,which will slow the speed during upgrading software or information.

The Auto Key Programmer whole process will be scheduled to complete until middle of March,2018.Therefore,we sincerely show our deep regret and sorry for the inconvenience that may have caused you.”

OBDSTAR X300 PRO3 Key Master

http://www.fobdii.com/wholesale-368-obdstar-x300-pro3-full-package.html

OBDSTAR X300 DP PAD Tablet Key Programme

http://www.fobdii.com/wholesale-140-obdstar-x300-dp-standard-configuration.html

OBDSTAR X300M

http://www.fobdii.com/wholesale-72-obdstar-x300m-for-odometer-adjustment-and-obdii.html

Cruise Control options For GM Techii diagnostic scan tool

GM Tech2 OBDii diagnostic scanner has strong capacities that is possible to project multi programming functions, cruise control included.

GM TECH2 Scanner Features:

Tech2 Diagnostic Scan Tool For GM SAAB OPEL SUZUKI Holden ISUZU With 32 MB Card And TIS2000 Software Carton Package

1) GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

But some users cannot/fail to enable cruise control settings with Tech2 scan tool. Take an example of a GM Tech2 owner, Here is how he did it:

1. Connect GM TechⅡdiagnostic tool to car via OBD port
2. Select Vehicle Control Systems, and navigate to Computer/Integrating Systems
3. Select Modules Replacement/Setup
4. Follow the system screen prompts, but he cannot see cruise control option

So he held a view that GM Tech 2 is not possible to activate cruise control/ has no cruise control options.

But actually, GM tech 2 would make it work.

Fobdii.com here provides all GM Tech 2 OBDⅡscanner cruise control options:

Cruise Control – Body > Instrument Panel Cluster > Special Functions > Input Tests
Cruise Control – Body > Instrument Panel Cluster > Special Functions > Lamp Test
Cruise Control – Body > Instrument Panel Cluster > Special Functions > Status Indicators Test Cruise Control – Body > Powertrain Interface Module > Special Functions > Output Controls Cruise Control – Powertrain > Special Functions > Engine Output Controls
Cruise Control Active – Body > Instrument Panel Cluster > Special Functions > Input Tests
Cruise Control Active – Body > Instrument Panel Cluster >Special Functions>Status Indicators Test
Cruise Control Cycle – Powertrain > Special Functions > Engine Output Controls > Cruise Control
Cruise Control Options – Powertrain > Special Functions > Option Reprogramming
Cruise Disable – Powertrain > Special Functions > Engine Output Controls
Cruise Enable – Powertrain > Special Functions (Natural Gas) > Engine Output Controls
Cruise Enable – Powertrain > Special Functions > Engine Output Controls

If you cannot find cruise control options, try another way around.

http://www.fobdii.com