How To Program Ford Fiesta 2016 All Smart Keys Lost By Lonsdor K518

One of our customer have successfully programmed smart key on a Ford Fiesta year 2016 by using Lonsdor K518ISE key programmer when all keys lost yesterday.

Guide:

Connect K518ise host with vehicle via OBD diagnostic socket

Turn on Lonsdor K518, press on Start button, dashboard displayed “Key not detected”

select Immobilizer->Ford->Fiesta->Program Smart Key->Program Key->All keys lost

k518-ford-fiesta-2016-1

k518-ford-fiesta-2016-2

k518-ford-fiesta-2016-3

k518-ford-fiesta-2016-4

k518-ford-fiesta-2016-5

Require at least two smart keys to be programmed

k518-ford-fiesta-2016-6

Insert new Auto Key Programmer  key and turn ignition switch on

Press the Start button

k518-ford-fiesta-2016-7

Configuring system

k518-ford-fiesta-2016-8

Reading pin code

k518-ford-fiesta-2016-9

Configuring system

Press Lock button of the first smart key for 1 sec within 15 sec

k518-ford-fiesta-2016-10

k518-ford-fiesta-2016-11

configuring system, please wait about 10 minutes

Insert the smart key into slot

k518-ford-fiesta-2016-12

Configuring

Remove the smart key from card slot

k518-ford-fiesta-2016-13

Press Unlock button of the next smart key for 1 sec within 15 sec

k518-ford-fiesta-2016-14

configuring system, please wait about 10 minutes

k518-ford-fiesta-2016-15

Insert smart key into slot
Remove key from slot

Lonsdor K518ISE will ask continue to program smart key, click on Cancel

k518-ford-fiesta-2016-16

Program smart keys success.

k518-ford-fiesta-2016-17

k518-ford-fiesta-2016-18

The new keys will start car.

Success.

http://www.fobdii.com

How To Program Ford Escort 2017 All Keys Lost By Lonsdor K518

Lonsdor K518 auto key programmer has successfully programmed smart keys on a Ford Escort year 2017 under all keys lost situation.

ford-escort-2017

Key information:

Original key: 3-button folding key

Remote frequency: 433MHz

Chip type: 49 chip

Device to program: Lonsdor K518 key programmer

Requirement: At least 2 keys are required to be programmed

k518-ford-escort-1

Procedure:

Connect K518 Auto Key Programmer host with vehicle via OBD socket

Turn ignition switch to ON position

Select Ford->Escort->Program Key->All keys lost

k518-ford-escort-2

k518-ford-escort-3

k518-ford-escort-4

k518-ford-escort-5

Turn iginition off

k518-ford-escort-6

At least 2 keys are required to be programmed

k518-ford-escort-7

Insert first key and turn on ignition

k518-ford-escort-8

k518-ford-escort-9

Turn ignition off and remove key

k518-ford-escort-10

Insert second key and turn on ignition

k518-ford-escort-11

Lonsdor K518ISE identified number of keys programmed: 2

k518-ford-escort-12

Program success

k518-ford-escort-13

Disconnect Lonsdor k518 programmer.

Test the new keys.

Program BMW X6 CAS3++ Remote Key used Lonsdor K518

Guide to add remote key to a BMW X6 CAS3++ immobilizer system by using Lonsdor K518 key programmer.

Lonsdor K518ISE Technical Parameter:

RFID:                                                          Support 125KHz ASK,134.2KHz FSK
CPU:                                                           ARM Cortex-A7 Quad-core Processor Speed 1.34GHz
Display:                                                      1024*600,7 inch IPS capacitive
Memory:                                                      eMMC 8G RAM 1G
Battery Capacity:                                       3800 mAh
Power Supply:                                           DC12V 1A
Power port:                                                5.5×2.1mm
OBD Port:                                                   OBD-II
Comm Port:                                               USB 2.0-type B
OBDII Protocols:                                       ISO15765,ISO9141,ISO14230,SAEJ1850,VW TP1.6 TP2.0 etc
KPROG:                                                     Support programming MCU and EEPROM on ECU circuit board.
WIFI Communication Distance:           10m

Procedure:

Step 1: Update CAS3++

Connect K518 host with vehicle via OBD socket

Select BMW->By System-> CAS2/CAS3-> Program key

lonsdor-k518-bmw-x6-1

Ready to generate dealer key:

  1. The operation can add a key to vehicle (select unused key position)
  2.  The operation can replace original key (select used key position)
  3. Can generate key with K518 by OBD or slot

Press YES

Insert key that will start vehicle
Turn ignition ON

Lonsdor K518 will display CAS information

It shows the CAS type is not supported, follow guides to update CAS++ (ISTAP).

lonsdor-k518-bmw-x6-2

select CAS3 Update

lonsdor-k518-bmw-x6-3

Ready to update CAS3

  1. The operation will update CAS++
  2. Please backup original EEPROM data before operation

lonsdor-k518-bmw-x6-4

Insert key that will start vehicle
Turn ignition ON

Read CAS part number and type. Auto Key Programmer Then read key information, tooth code, remote frequency, ignition key position etc

lonsdor-k518-bmw-x6-5

lonsdor-k518-bmw-x6-6

Read to update CAS. The procedure takes about 10 minutes

lonsdor-k518-bmw-x6-7

Do not carry on if battery voltage is lower than 11.5V

Make sure vehicle has enough power supply andn battery voltage is higher than 11.5V.

Don’t disconnect battery nor insert key into ignition during the procedure.

If it is smart key, take away from vehicle

lonsdor-k518-bmw-x6-8

Remove key from ignition
Take smart key away from vehicle

lonsdor-k518-bmw-x6-9

Restarting CAS…

lonsdor-k518-bmw-x6-10

Erasing FLASH data

lonsdor-k518-bmw-x6-11

Downloading and verifying data until it completed

Step 2: Program Key

Select Program Key function on Lonsdor K518ISE menu

lonsdor-k518-bmw-x6-12

Insert a working key and turn on ignition

K518 read updated CAS information

Encrypted CAS, please backup EEPROM data before operation

lonsdor-k518-bmw-x6-14
Read key information again

Reading RAM, takes about 1 minute

lonsdor-k518-bmw-x6-15

Remove key from ignition
Take smart key away from vehicle

serurity check
reading key information

Select a unused key position (Key Position 3 or 4) and generate by OBD

lonsdor-k518-bmw-x6-16

Insert the key to be programmed into K518 host slot to identify if the key is brand new

lonsdor-k518-bmw-x6-17

Select key type: Remote Key

lonsdor-k518-bmw-x6-18

Insert the key to be programmed into ignition
Put smart key into card slot
Well connect Lonsdor K518 key programmer with vehicle

Writing key information

lonsdor-k518-bmw-x6-19

lonsdor-k518-bmw-x6-20

To program smart key or remote key, you need complete follow steps:

  1. Remove key from ignition
  2. Insert key
  3. Press on Start button

lonsdor-k518-bmw-x6-21

lonsdor-k518-bmw-x6-13

If cannot start vehicle, or dashboard displays ELV icon , you may need to synchronize DME or ELV accordingly
Write key success

lonsdor-k518-bmw-x6-22

Test the new remote key.

http://www.fobdii.com/wholesale-780-lonsdor-k518ise-key-programmer.html

How To Used Lonsdor K518 Program Ford Edge pre-2015 Smart Key by OBD

Here’s guide to program smart keys to Ford Edge pre-2015 by using Lonsdor K518ISE Auto Key Programmer via OBD without pin code.

Key information:

Original key: 5-button smart key

Frequency: 433MHz

Pin code: No

Key required: at least 2 smart keys

Card slot: central console box

Device to program: Lonsdor K518ISE (English version of K518)

Ford-edge

Connect K518 host with vehicle via OBD diagnostic socket

Turn ignition switch to ON position

Select Ford->Edge-> -2015->Program smart key->Add smart key

lonsdor-k518-ford-edge-1

lonsdor-k518-ford-edge-2

lonsdor-k518-ford-edge-3

lonsdor-k518-ford-edge-4

lonsdor-k518-ford-edge-5

Turn ignition OFF

Lonsdor K518 prompts at least 2 smart keys to start vehicle

lonsdor-k518-ford-edge-6

Configuring system, please wait for 10 minutes

Insert new smart key into card slot

Configuring…

lonsdor-k518-ford-edge-7

lonsdor-k518-ford-edge-8

Remove key from card slot

lonsdor-k518-ford-edge-9

Program 1st smart key success. Press YES to program next key.

lonsdor-k518-ford-edge-10

Insert new smart key into card slot

Remove key from cars slot

Program success.

lonsdor-k518-ford-edge-11

Reference:

Lonsdor K518ISE Ford vehicle list

FORD

Series Origin Year Fuel Type Function
New Mondeo Other Other Other Key Programming
New Mondeo Other Other Other Smart Key Programming
Escort Other Other Other Key Programming
New Edge Other 15- Other Smart Key Programming
Mustang Other Other Other Smart Key Programming
Kuga USA 05-07 Other Key Programming
Raptor F350 Other Other Other Key Programming
Transit Other Other Other Key Programming
Mondeo Wins Other Other Other Smart Key Programming
Mondeo Wins Other 2012 Other Key Programming
Mondeo Wins Other 2011 Other Key Programming
Focus Other 2004-2008 Other Key Programming
Focus Other 2011-2013 Other Key Programming
Kuga Other Other Other Key Programming
Ecosport Other Other Other Key Programming
Fiesta Other Other Other Key Programming
Focus Other 2009-2011 Other Key Programming
Mondeo Other Other Other Key Programming
Ecosport Other Other Other Smart Key Programming
Fiesta Other Other Other Smart Key Programming
Focus Other 14- Other Key Programming
Exploror Other 11- Other Key Programming
Classic Focus Other Other Type2 Key Programming
Kuga Other Other Other Smart Key Programming
New Edge Other -15 Other Smart Key Programming
Raptor F150 Other 2011-2014 Other Key Programming
Raptor F150 Other 2009-2010 Other Key Programming
Raptor F250 Other 2009-2010 Other Key Programming
Everest Other Other Other Smart Key Programming
Classic Focus Other Other Type1 Key Programming
Exploror Other 15- Other Smart Key Programming
Taurus Other 15- Other Smart Key Programming
Everest Other Other Other Key Programming

www.fobdii.com

How To Used Lonsdor K518ISE Program Ford Everest 2016 Remote Key

Today tested Lonsdor K518 key programmer English version on a Ford Everest 2016. Working perfectly.

 

Program Ford Everest 2016 Remote Key with K518:

At least 2 keys are required to program smart key for Ford

Connect Lonsdor K518 host with vehicle via OBD diagnostic socket

see the connect and OBD location

k518-ford-everest-1

Select Immobilizer->Ford->Everest->Other Region or America ->Program Smart Key-> Add a key

k518-ford-everest-2

k518-ford-everest-3

k518-ford-everest-4

k518-ford-everest-5

Turn ignition ON

Cummuinicating…

Lonsdor K518ISE shows vehicle part number, PIN and current key number: 2

k518-ford-everest-11

Reading pin code

k518-ford-everest-6

Insert a new Auto Key Programmer and turn ignition ON

k518-ford-everest-7

Programming…

Program success.

Identified number of keys: 3

k518-ford-everest-8

Program complete

k518-ford-everest-9

Test the remote and start vehicle

k518-ford-everest-10

Working.