How To Adds Citroen Berlingo 2017 Remote Key SKP1000 Key Programmer Success

Here’s the guide to add remote keys on a Citroen Berlingo 2017 by SKP1000 car key programmer by OBD.

SKP1000 Car Key Programmer Functions:

Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Read keys from immobilizer memory
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;
New remote controller programming;
Immo PINCODE reader for many vehicles and no need pincode when programming keys for many vehicles
Mileage adjustment via OBD;
With full and strong database for the most important vehicle makes;
Remote assistance
EEPROM chip read and immobilizer initialization;
EPB(Electric park brake);
Oil/Service reset;
EEPROM/PIC adapter

SKP1000 Key Programmer Preparation:

Pin code is required. Ask dealer or calculated by PSA pin code calculator.

SKP1000 Key Programmer Procedure:


Connect OBD adapter and turn ignition on

Select Citroen->Berlingo->Immobilizer


Close all doors and trunk


Insert key and turn ignition on within 15 sec




SKP1000 will ask to enter 4-digit pin code to access

Confirm pin code



Turn ignition off and turn it on again



Add 1st key success
press YES to add 2nd key

Follow procedure to add 2nd or 3rd keys.


If want to program remote, turn ignition ON
Press any button of the remote for more than 3 seconds

Test the remote keys.

Lonsdor K518ISE Comparison With SKP1000 Tablet Key Programmer

There are two new release auto key programmer by Lonsdor: SKP1000 and K518ISE. Here post a comparison table for you to know the difference between them so that you might know which one to choose.

SKP1000 Tablet Key Programmer, English version of Lonsdor CI600 Plus,perfectly Replaces SKP900 Key Programmer. Performs immobilizer, mileage adjustment, remote controller, Oil/service Reset, throttle body adjustment, EPB, pin code calculation and special function.

Lonsdor K518ISE Key Programmer with wider vehicle coverage in IMMO key programming and odometer adjustment. Lonsdor K518ISE is built in Volkswagen 4th 5th adapter and Chip & remote detection module.

Product Name Lonsdor K518ISE SKP1000
Item.No FSK213 FSK223
Price 1195 usd 477.99 usd
Manufacturer Lonsdor Lonsdor
Language English English
Update Method update online Lifetime free update software and firmware
Vehicle Coverage has a wide range of vehicle coverage, incl.
the luxury cars i.e BMW, Volvo, Ferrari, Bentley, Lamborghini
as well as Volkswagen 4th 5th IMMO,
Toyota/Lexus smart key all key lost via OBD etc.
nearly the same vehicle coverage as SuperOBD skp900
Functions OBD mileage adjustment, remote controller,
oil/service reset, ETC, EPB,
EEPROM chip read.(BMW FEM module programming)
Special function:OBD mileage adjustment, remote controller,
oil/service reset, ETC, EPB, EEPROM chip read.



SKP1000 tablet key programmer User manual in English

SKP1000 Tablet Auto Key Programmer A Must Tool for All Locksmiths Perfectly Replaces SuperOBD SKP900 and CI600 Plus
SKP1000 Tablet Auto Key Programmer, English version of Lonsdor CI600 Plus,perfectly Replaces SKP900 Key Programmer. Performs immobilizer, mileage adjustment, remote controller, Oil/service Reset, throttle body adjustment, EPB, pin code calculation and special function.


  1. Product description. 1

1.1 Supported protocol 2

1.2 Package Includes. 2

  1. Function Menu Instruction. 3

2.10 Main menu basic functions. 3

2.11 immobilizer function: 4

2.12 Mileage adjustment via OBD.. 5

2.13 New remote system programming. 6

2.14 Oil/Service reset 6

2.15 throttle body adjustment 7

2.16 EPB(Electric park brake). 8

2.17 Immo PINCODE reading. 8

2.18 Personalized settings. 9

2.19 Special functions. 10

2.20 System settings. 10

2.21 Update Firmware. 10

  1. How to use SKP1000 to program key on specific car model?. 10
  2. Update Firmware Procedure. 13


1. Product description

SKP1000 is Multifunction programmer with 4’inch touch screen, mainly designed for auto Key programming. covers all functions of SuperOBD SKP-900 key programmer. SKP-1000 is a convenient device which can perform immobilizer, mileage adjustment, remote controller, Oil/service Reset, throttle body adjustment, EPB, pin code calculation and special function. Integrates more application and service, such as Maintenance Database, remote assistant, and One Key Update etc.

— Confirm      — Back

— Up                — Down

— Left              — Right

— Smart remote controller frequency detection area


SN: Serial Number


1.1 Supported protocol



1.2 Package Includes

1* Main unit

1* touch pen

1* main cable

1* Honda 3pin adapter

1* Kia 20pin adapter

1* Hyundai / Kia 10pin adapter

1* Haima 7pin adapter

1* power adapter

1* TF card

1* TF card reader

1* USB cable

1* CD with user manual


2. Function Menu Instruction

2.10 Main menu basic functions

Auto functions

Choose ” Auto functions” to perform immobilizer, mileage adjustment, remote system,

Oil/service Reset, ETC , EPB, pin code calculation, personal settings and special


2.11 immobilizer function:

Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Read keys from immobilizer memory
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;


Choose “Immobilizer”, then the car brand shown as below.


2.12 Mileage adjustment via OBD

Choose “Adjust mileage”, then the car brand shown as below.


2.13 New remote system programming

Choose “Remote system”, then the car brand shown as below.


2.14 Oil/Service reset

Choose “Maintenance”, then the car brand shown as below.



2.15 throttle body adjustment

Choose “ETC”, then the car brand shown as below.


2.16 EPB(Electric park brake)

Choose “EPB”, then the car brand shown as below.

Woks on Changhe, Ford, Suzuki, Mazda, Chery, Kia, Nissan and Hyundai.


2.17 Immo PINCODE reading

.Immo PINCODE reader for many vehicles and no need pin code when programming keys for many vehicles.


2.18 Personalized settings

Incl. Language, Reset, Safe Warn, steering Angle, TPS and other.

2.19 Special functions

Plug into the adapter to perform special functions.


2.20 System settings

Choose ” System settings” to read the machine basic info.


2.21 Update Firmware

Click on “Firmware update” to update the system or the Adaptor.


2.22 User program test

Choose “User program test” to reset the SKP1000 machine to collect corresponding data.


3. How to use SKP1000 Key Programmer to program key on specific car model?

Step-by-step procedure:

For example, to program smart key on Hyundai SONATA 8, firstly connect the main cable to the machine, then plug the OBDII adapter to the car.

Power on the SKP1000 machine, until you see the LOGO, press [YES] to main menu, Choose “Immobilizer”, press “Yes” to vehicle list.


Choose model: Hyundai, press [Yes] to enter.


Choose “Smart key”, press [Yes] to enter.


Choose ” by Vehicle”, press [Yes] to enter.


Choose “SONATA 8 (with slot), press [Yes] to enter.


Choose “Smart key (with slot), press [Yes] to enter.


Follow the tip to turn off ignition, press [Yes]


Follow the tip to open the door and close for one time, press [Yes].


Choose “Program Smart Key”, press [Yes]


Follow the tip, insert the smart key into the slot, and you can hear alarm sound, turn off the ignition, press [Yes].


Input the password


Check if the password is correct, press [Yes] to confirm.


The first smart key program successfully, and it will ask you if you program the next one, press [Yes] to confirm.


Insert the second smart key into the slot, you can hear the alarm sound, press [Yes].


Program key successfully, press [NO] to back.


With two new smart keys, you could start the car, if you need to add more keys, just repeat the above steps.


4. Update Firmware Procedure

Before update firmware, please take out the TF card and insert it into the card reader, then plug into the computer USB port. Double click “My Computer”, find out ” local Disk (H:), right click to choose “Format”.


Tip: Tick on the “Quick format” and click “Start.

After complete format, go to the official site to download the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.

Click on “Firmware update” to update the system or the Adaptor.


Firstly choose “System firmware”, press [Yes], the procedure shown as below:


Update Firmware succeed shown as below, Press [NO] to back.


Choose ” Adapter update”, after finish, reboot the machine to go on use SKP1000.



SKP1000 Read Fiat Siena ISO code and Program ID48 Special Key via OBD

Older Fiat Siena or Palio are required to remove ECU or write key to start to make new key. Here is revolutionary solution on getting Fiat ECU ISO code and programming special ID48 chip key by using SKP1000 key programmer via OBD directly.

SKP1000 tablet auto key programmer=SKP900+ Lonsdor CI600 Plus.

Lonsdor SKP1000 Key Programmer Instruction:

Step 1: Read ECU ISO code (security pin code)

Select car brand: Fiat

Select read iso code
Select Electronic immobilizer system
Select read iso code
After read ecu iso code success, disconnect the battery.
If read iso code failed,please disconnect the battery and try again
(Anyway, disconnect the battery)
SKP-1000 read Fiat info and fiat iso code
Press YES to continue
Check SKP1000 Key Programmer if you have a working key
If yes, Press YES button to continue
Turn ignition to ON position
Turn ignition to OFF position
Turn Ignition ON
Read iso code success
manually enter 5-digit iso code

SKP1000 will read the immo data, please write download the numbers (will be used to generate chip)

Step 2. Generate Fiat special ID48 chip


Select Fiat common chip to generate special chip

select generate Fiat ID48 special dealer key
Insert the immo adapter into the SKP1000 car key programmer, select Special function and select Generate Fiat chip
Insert the blank ID48 chip into the coil of the adapter
Manually enter 24-digit immo code (read previously)
Enter 24-digit code marked red

confirm the entered digits

Step 3: Program chip key


select Program key

Select Siena key programming,
SKP1000 will also Car program key for Fiat 500, Boyue,Palio,Leap,viaggio and Perla
Select Electronic immobilizer system
Select OBDII connector
turn ignition to ON position
select Program key
Key without programming cannot be used
Press YES to continue
enter 5 digits iso code
continue to program more keys
Press YES to continue
please change next key
If the dashboard indicator goes off, program success.
Disconnect SKP 1000 and test the new key.